Nordtek
 

Toroid Transformer 230V, 2xSec, 800VA

Return to normal view
High quality open style 800VA toroidal transformers with a single 230 V a.c. 50/60Hz primary winding.
Twin secondary windings may be connected in series, parallel or used independently.

  Toroid Transformer 230V, 2xSec, 800VA   Schematic - Electrical   Primary: 230V @ 50/60Hz

Secondary: 2 x Vsec @ 400VA Each
Suitable for Series/Parallel connection		   Open wound toroidal transformer  


Part Number Full Load Vsec (V) Rated Current
per Sec (A)		 No Load Vsec (V) DC Resistance (Ohms)
@ 25°C
0800P1-2-040 2x40 10.000 2x42.38 2x0.1952
0800P1-2-045 2x45 8.889 2x47.62 2x0.1345
0800P1-2-050 2x50 8.000 2x52.86 2x0.1673
0800P1-2-055 2x55 7.273 2x58.10 2x0.1844

Primary Winding

Input Voltage Range: 230V ± 10% (207V - 253V) @ 50/60Hz
DC Resistance @ 25°C = Approx 1.3 Ohms
Magnetising Current @ 230V = Approx 33.1 mA
Magnetising Current @ 253V = Approx 112.0mA

Losses

Iron Losses 3.65 Watts approx
Copper Losses 49.5 Watts approx

Temperature Class

Winding Wire (Primary & Secondary) - Class H (180°C)
Insulation between input and output - Class B (130°C)
Connection lead insulation - Class A (105°C)

Standards

Approved to UL506: File E215495
Approved to EN61558 : KEMA Certificate 2001469
Conforms to EN60065, VDE0550, BS415.

Physical Data

Approximate Dimensions:
Diameter 162mm - (Measured away from lead-out bulge; Allow extra 4mm at leads.)
Height 60mm

Approximate Weight:
5.10 Kg

Terminations

Primary:
Solid copper conductors (extension of winding wire), insulated over their entire length with PVC tubing. Double-insulated over entire length with Class A PVC tubing. 150mm Long, 10mm tinned ends.

Secondary:
Solid copper conductors (extension of winding wire), insulated over their entire length with PVC tubing. 150mm Long, 10mm tinned ends.

Mounting Hardware

Each transformer is supplied with a mounting kit, comprising: 2 pieces of Neoprene Insulating discs, 1 piece of Dished Steel Washer


See other power variants here: 230V, 2xSec, 15-1000VA