NORDTEK DANMARK - TS2 Double 4-22W - nordtek.com

TS2 Double 4-22W

Elektronic Starter Switch for single or twin series fluorescent lamps 4-22W

The soft start system utilised in the TubeSaver first pre-heats the lamp cathodes in the tube to their working temperature, before applying a controlled voltage pulse to strike the arc. This method of ignition prevents unnecessary damage on the cathode inside the tube and significantly prolongs the lifespan of the tube.

TS2 also works as a fluorescent lamp safety starter as it has a built in safety monitoring system, which shuts down the system in the event of a fault.

Is used:

Factory halls, offices and all rooms where "soft" start of the tube is wanted, and where a start time of approx. 3 seconds is sufficient.

Notice:

Disadvantages – None, only advantages!

- Ordinary glow starters can immediately and very simply be substituted with TubeSaver. -

Data

Operating voltage:
Pre-heat time:
Operating temperature:
Pulse height:
Safety shutdown:
For Lamp types:
Replaces glow type starters:

 110-260V ac 50/60Hz
 approx. 2.8 seconds at 20°C
  -20°C to +75°C
 1500V max.
 within 3.5 seconds
 4W tube to 22W tube - see sheet
 S2, FS2, ST151, ST172

See TubeSaver Intro here
See Compatibility Sheet here
See Detailed Explanation here

Top of page