NORDTEK DANMARK - EI48 - Encapsulated PCB Mount 50/60Hz Transformer - 8.2-13VA - nordtek.com

EI48 - Encapsulated PCB Mount 50/60Hz Transformer - 8.2-13VA

Our comprehensive selection of products also includes a series of EI48 safety transformers for PCB mounting.

High-quality encapsulated vacuum potted transformers. Output power from 8.2VA.

  Print Layout - EI48 Transformer   Pin and Transformer Height - EI48 Transformer   EI48 - Encapsulated PCB Mount 50/60Hz Transformer - 8.2-13VA  
 
View from PCB   Solder pins 0.8 mm Ø  - Grid 5 mm


Type Max. Ambient Temperatur Pin Connections Pin Connections DVE * Stack
Height
mm		 Case
Height
(H)mm		 Weight
g
 EI48-12E/7.../... 70°C/B 6...42V - 8.20 VA 2x6...21V - 2x4.10 VA x nkf 16.8 34.6 290
 EI48-12A/7.../... 70°C/B 6...38V - 9.40 VA 2x6...19V - 2x4.70 VA x nkf 16.8 34.6 290
 EI48-12F/7.../... 70°C/B 6...38V - 10.50 VA 2x6...19V - 2x5.25 VA x bkf 16.8 34.6 290
 EI48-32E/7.../... 70°C/B 6...39V - 9.80 VA 2x6...19V - 2x4.90 VA x nkf 20.5 38.5 335
 EI48-32A/7.../... 70°C/B 6...38V -11.40 VA 2x6...19V - 2x5.70 VA x nkf 20.5 38.5 335
 EI48-32F/7.../... 70°C/B 6...36V - 13.00 VA 2x6...18V - 2x6.50 VA x bkf 20.5 38.5 335
  • Approved to EN 60742
  • Vacuum cast
  • Two chamber coil
  • Safety class II
  • Protective system IP 00
  • Conditionally short-circuit proof (*bkf) through built-in temperature fuse,
    or not short-circuit proof (*nkf)


Note: If using the conditionally short-ciircuit proof transformer type (*bkf), no strip conductors may be guided between the primary connecting pins on the component insertion side, because in this area there is an unprotected live soldering terminal.


Variants available on request.


#top#